Air Preparation There are 21 products.
Air Preparation There are 21 products.
Minimum drip flow: 0.015 m3/min Oil capacity: 20 cm3 Weight: 0.1kg
Operating Size Pushing force (N): 18 Torque (N.m): 0.5 Product Weight: 0.17kg Effective Sectional Area (mm2) IN/OUT: 18 OUT/EXHAUST: 5
Product Weight: 0.3kg Effective Sectional Area (mm2) IN-OUT: 70 OUT-EXHAUST: 50
Not Electric Degree of filtration: 20 Micron No filter clogged signal Automatic condensate discharge Pressure Regulator: 1-8 bar V3V manual lockable valve No pressure switch Standard
By incorporating both an electric valve and pressure switch within the ONE Unit, you can monitor your air pressure and shut down the air supply if the pressure becomes too low or high. By incorporating a soft start valve your machine will restart safely when the air supply is reintroduced.
These units are fitted with a soft start valve to ensure that when the air pressure is re-introduced it builds up slowly to avoid damaging your machine.
Positive Pressure (0.000 to 1.000MPa) 2PNP Output Rc1/8 (Female Thread) 2m Connector Cable
Panel Bracket and Front Protective Cover for CKD Electronic Pressure Switch.
