Push-in Fittings - Composite  There are 47 products.

Push-in Fittings - Composite  There are 47 products.

Push-in Fittings - Composite

Push-in Fittings - Composite PDF

Simple and quick to connect/disconnect. PC type is useful for piping in confined space, with an internal hex-wrench system. Elliptical sleeve makes it possible to apply and remove the tube easily in confined spaces. Fittings are equipped with a gasket/O-ring and with teflon treatment pre-installed on the thread. Fittings with "G" prefix denote 20 Bar rating.

Materials: black acetyl resin, nickel plated brass (EN-12164 - CW614N), stainless steel locking ring

Seals: oil resistant rubber (NBR)

Working Pressure (Bar): 16

Working Temperature (oC): -10 to +80

Media: filtered compressed air

Tube Tolerance: 4 to 10mm tube 0.05, 12mm tube 0.1

Preferred Tube Materials: polyurethane, nylon (PA6), rilsan (PA11/12), teflon

0 Review(s)

£1.99
0 Review(s)

Fluid: Air (no other gases or liquids) Working Pressure Range: 0-150 PSI Negative Pressure: 7.5 PSI Temperature Range: 0-60 Degrees Applicable Tube Material: Polyurethane and Nylon  

£6.28
0 Review(s)

Fluid: Air (no other gases or liquids) Working Pressure Range: 0-150PSI Negative Pressure: -29.50 in Hg, -750mmHg Temperature Range: 0-60 Degrees Applicable Tube Material: Polyurethane and Nylon

£5.31
0 Review(s)

Fluid: Air (no other gases or liquids) Working Pressure Range: 0-150 PSI Negative Pressure: -29.50 in Hg, -750mmHg Applicable Tube Material: Polyurethane and Nylon

£3.73
0 Review(s)

Fluid: Air (no other gases or liquids) Working Pressure Range: 0-150 PSI Negative Pressure: -29.50 in Hg, -750mmHg Applicable Tube Material: Polyurethane and Nylon

£4.19
0 Review(s)

Fluid: Air (no other gases or liquids) Working Pressure Range: 0-150 PSI Negative Pressure: -29.50 in Hg, -750mmHg Applicable Tube Material: Polyurethane and Nylon

£4.19
0 Review(s)

£2.35
0 Review(s)

£1.02
0 Review(s)

£0.81
Showing 1 - 20 of 47 items