Eliminizer Dryer/Filter - Polycarbonate Bowl w/ Indicator



- +

A range of dryers/filters (up to 150 cfm) to provide clean, water free air. Using inverse flow filtration (patented) this is a point of use dryer/filter that fills the void between ordinary filters and refrigerated dryers.

All units fitted with automatic drain valve and are available with or without a differential pressure indicator to monitor condition of element.

Available with polycarbonate bowl with guard or with metal bowl.

Pressure: 10 bar (max)
Temperature: Polycarbonate bowl +50 deg C (Metal bowl +65 deg C)
Pressure drop: < 1psi (@100 psi and recommend flow rate)
Filtration: 1 micron

ISO8573.1: particulate class 2 (see engineers data section for a breakdown of ISO8573.1 numbers)

When selecting an Eliminizer dryer/fitler choose a unit where the flow required is approximately 50% of the maximum in the table below.

Technical Information

Optimum             Maximum           Connection        

10cfm                    20cfm                    1/4BSPP

17cfm                    34cfm                    1/4BSPP

17cfm                    34cfm                    3/8BSPP

17cfm                    34cfm                    1/2BSPP

30cfm                    60cfm                    1/2BSPP

45cfm                    90cfm                    3/4BSPP

75cfm                    150cfm                 1BSPP

No customer comments for the moment.

Write a review

Eliminizer Dryer/Filter - Polycarbonate Bowl w/ Indicator

Eliminizer Dryer/Filter - Polycarbonate Bowl w/ Indicator