Monitored Dump Double Valve ISO

New

£476.42

- +

Starting from a series of sturdy, reliable valves, such as those to ISO5599/1, some special features have been added, such as the presence of a valve status diagnostic system and the creation of a double channel guaranteeing architecture redundancy.

For those requiring higher PLs, we have also developed a double-channel version (redundant) that requires the use of ISO 5599/1 valves with a monitored coil arranged so that ports 2 are in parallel and ports 4 are in series. If just one of the valves de-energizes, port 4 relieves, so, even if one of the two coils remains blocked, the other guarantees relief of the compressed-air circuit. In this case, too, the presence of spool position sensors can be used to monitor the status. The double valve is also available in 3 sizes for the ISO 5599/1 series. It is a category 4 component according to ISO EN 13849 and is suitable for use in safety circuits up to PL=e.

Both the single- and the double-channel valve come with:

- a Type-Approval n° P13104/11/mC/nb issued by Bureau Veritas in accordance with EN ISO 13849

- a certificate of compliance examination to the Machinery Directive 2006/42/EC CV **No. CV 002-10-2011 released by Bureau Veritas.

 

No customer comments for the moment.

Write a review

Monitored Dump Double Valve ISO

Monitored Dump Double Valve ISO

Related Products

ISO1 Sub Base Side Ported 1/4BSP

£14.25

Product Weight: 0.3kg Effective Sectional Area (mm2) IN-OUT: 70 OUT-EXHAUST: 50

£31.85

Complies with EN983 - 5.3.4.3.2. and ISO 4414 - 5.4.5.11.1

£27.42

Manufactured from chemical and impact resistant acetal resin.

£12.27

- Robust and compact design - Extensive, easy to fit with additional nozzle range  

£16.51

Low noise Safety blowgun meets OSHA standard

£23.47

Safety Aircurtain blowgun with increased air flow and low noise level (meets OSHA standard). This blowgun is equipped with a flat safety nozzle, which not only meets requirements on noise and safety, it also provides extremely high blowing force.  

£15.64

A comprehensive range of threaded (1/8" inlet), easy to fit, interchangeable nozzles to cater for all blowgun applications.

£2.87

2 bar automatic pressure reduction, low noise level (meets OSHA standard) Conforms to HSE requirements. Air inlet automatically reduced to 2 bar.

£50.40

TURBO nozzle safety blowgun increases air flow by 100%

£25.17

Removes oil mist from exhaust airs Efficiently silences exhaust air Improves working conditions

£90.76

REG 200 KEY  8 BAR

£51.91

Slow Start Valve with Silencer and "DIN" plug connection  

£176.67