Air Fuses


Complies with EN983 - and ISO 4414 -


- +

Function:  AirGuard Technical Cut-Away

(P) is the inlet. Air passes the piston (1) and continues through the seat (3).

The air flow, passing the piston, is slowed down by means of length wise grooves on the outer side of the piston. If the flow is too high, the air cannot pass the piston quickly enough, and the piston is forced against the spring (2) and towards the seat. The maximum flow is shown in the graph. If the value indicated is exceeded e.g. if the hose suddenly breaks - the air supply is automatically shut off. An integral bleed hole allows some air to flow though. This enables the line pressure to automatically reset the AirGuard once the main line break is repaired.



No customer comments for the moment.

Write a review

Air Fuses

Air Fuses

Complies with EN983 - and ISO 4414 -

Related Products

ISO1 Sub Base Side Ported 1/4BSP


Product Weight: 0.3kg Effective Sectional Area (mm2) IN-OUT: 70 OUT-EXHAUST: 50


Manufactured from chemical and impact resistant acetal resin.


- Robust and compact design - Extensive, easy to fit with additional nozzle range  


Low noise Safety blowgun meets OSHA standard


Safety Aircurtain blowgun with increased air flow and low noise level (meets OSHA standard). This blowgun is equipped with a flat safety nozzle, which not only meets requirements on noise and safety, it also provides extremely high blowing force.  


A comprehensive range of threaded (1/8" inlet), easy to fit, interchangeable nozzles to cater for all blowgun applications.


2 bar automatic pressure reduction, low noise level (meets OSHA standard) Conforms to HSE requirements. Air inlet automatically reduced to 2 bar.


TURBO nozzle safety blowgun increases air flow by 100%


Removes oil mist from exhaust airs Efficiently silences exhaust air Improves working conditions


REG 200 KEY  8 BAR


Slow Start Valve with Silencer and "DIN" plug connection